Owatrol Dilunett Paint Removing Gel

£21.36 – £45.18 inc VAT

Does not contain solvent or paraffin non flammable.
Strips waxes, varnish, paint and most antifouling paint.
Coating becomes soluble with water (rinse with water).
Strips up to 8 coats
Coverage Rate: 4m² per litre
Tools: Flat blade, synthetic brush, power washer
Exterior use
Clean up: Water
Working Time Alkyd/Oil-based: 1 coat: 5-15 mins, 2 coats: 10-30 mins, 3 coats: 15-45 mins
Working Time Acrylic: Test on a small area to determine working time
Suitable for all surfaces except aluminium (safe on gelcoat)

STEP 1 - Select Color:

Try different shades of each color range

Description

Owatrol Dilunett is a powerful, water washable solvent free paint stripper that will remove any oil and alkyd based paint, varnish or woodstain. The gel consistency of Dilunett means it will not run, thereby making it perfect for vertical surfaces, elaborate plaster or wood designs that need to be stripped. Up to 8 coats can be stripped in just a single application of Dilunett, which dissolves paint in even the smallest of recesses and the finest of details, softening all the layers for a simple and clean removal.

Owatrol Dilunett is suitable for almost any surface such as wood, metal and plastic. It is biodegradable, non-flammable, and safe to use in poorly ventilated or confined areas. Dilunett also does not requiring constant supervision or immediate removal of the softened coating.

Ideal Uses

Can be used on most surfaces; on wood (some woods such as Oak and Chestnut require more attention before using Dilunett), metal (except Aluminum), plastic, stone, cement etc
Wood Stain Remover
Ideal for surfaces difficult to strip due to size or intricate design
Suitable for both horizontal and vertical surfaces.
Solvent-free so no toxic fumes.
Capable of removing up to 8 coats of finish in just 1 application.
Non-flammable, does not dry out and remains active a long time.
Does not attack plastics, rubber, synthetic coating or gel coats (GRP).

Preparation

Remove any loose and flaking paint.
Brush off any physical surface contamination such as moss and general dirt.

Application

Apply a thick coat of Dilunett over the whole surface to be stripped.
For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood.
Allow product to work.
Remove Dilunett and dissolved paint with a stiff nylon scrubbing brush or paint scraper while flushing with water, alternatively use a pressure washer (max 60bars / 870psi). The use of hot water makes the job easier
Thoroughly rinse the surface with fresh clean water.
After stripping and rinsing, all porous surfaces must be immediately treated with Net-trol while still wet to neutralise the surface.

For further information and advice please refer to the Technical Data Sheet.