Description
Toupret Touprelith F is a superior exterior powder filler that will not sag or grin – ideal for rough masonry surfaces and many cementitious surfaces.
Physical and Technical Features
- Toupret Touprelith F is a filler in powder form made of cement, selected mineral extracts and binders.
- Mixing rate: 35% water (hence 0.35 litre water per 1 kg powder)
- Application thickness: limitless
- Consumption: 1.2 kg powder allows to fill a volume of 1 litre
- Working / open time: 30 minutes under 20 °C
- Second coat: once fully dry
- Overcoating: average 72 hours
- Colour: grey
- Shore hardness: 70
Use and Storage Conditions
- Substrates to be prepared as per the current trade practices.
- Substrates must be hard, cohesive, clean, sound and dry.
- Application tools: coating knife or with trowel or blade.
- Tools cleaning: the product residues are to be rubbed off when dry. Water cleaning is unnecessary.
- Preservation: store away from humidity.
Application Advice
- If you apply coloured paints, wait until the substrate is fully dry and make sure that colorants used are alkaline resistant.
- Do not overcoat with oil borne coatings (Pliolite, etc.) unless a priming coat of waterborne masonry paint is applied first.
- Do not apply Toupret Touprelith F on polystyrene, nor on adhesive coverings.
- Do not apply under a temperature < 5 °C and > 35 °C nor under an hygrometry rate over 80%.
- Do not apply on warm, overheated surfaces.
- Do not apply in sun exposure.
- In hot and dry weather conditions, generously moisten the surface before and after coating.
- The setting of the paste depends on its temperature: a high temperature will make it set quicker whereas a low temperature will make it set slower.