Blackfriar Aluminium Paint – Heat Resistant up to 150°C

£7.46£20.86 inc VAT

  • Heat-resistant to 150C/300F
  • Reflects heat from surfaces
  • Interior and exterior use
  • For metal and wood
  • Extra bright finish 

STEP 1 - Select Color:

Try different shades of each color range

Description

Blackfriar Aluminium Paint provides long-lasting, heat-resistant protection for interior and exterior surfaces the heat resistant aluminium resists dry heat up to 300°F. It can be used on metal and wood for an extra bright finish.

Preparation

  • Ensure the surface to be painted is clean, dry, and free from grease, oils, wax or any other surface contamination.
  • Remove any loose and flaking paint back to a firm feathered edge.
  • Galvanised metal should be degreased and primed with Blackfriar Multi-Surface Primer.
  • Rusty metal should be wire-brushed to a clean, bright surface and primed immediately with Blackfriar Anti-Rust Metal Primer.
  • New and bare surfaces should also be primed with an appropriate Blackfriar primer.

Application

  • Stir paint well using a broad stirrer before and during use.
  • Blackfriar Aluminium Paint may be applied by brush or spray.
  • Apply 1-2 coats, as required.
  • Thinning – Not recommended.
  • Coverage Rate: Up to 14 square metres per litre per coat.
  • Drying Time: Touch dry in 2 – 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Limitations

  • Do not use under cold (less than 5°C), damp or humid conditions.
  • Not suitable for direct application to galvanised metal, use Blackfriar Multi-Surface Primer first.
  • Due to the bright metallic finish of this product, colour transfer may occur.
  • For painted items that may be handled apply a clear protective topcoat such as Blackfriar Polyurethane Varnish (interior) or Blackfriar Exterior Varnish (exterior).
  • NB: The varnish may produce a yellowing effect.

Clean Up

  • Remove as much product as possible from application equipment before washing with white spirit.
  • Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

  • Store in a dry, safe place.
  • Do not store in environments where extreme temperatures may occur.
  • Keep within 5-30°C.
  • Do not store in direct sunlight.

Additional information

Size

, ,

X

Select options This product has multiple variants. The options may be chosen on the product page