Zinsser Perma-White

£17.45 – £56.99 inc VAT

Satin White Finish
Self priming sticks to most surfaces
Low Odour
Contains biocides and fungal agents to resist attack
High wearing, washable, scrubbable, stain and moisture resistant
7 Year performance
Interior use
Suitable for kitchens & bathrooms
Scuff & Scrub resistant
Touch Dry: 30mins
Re-Coat 2 hours, Full cure 10 days
Coverage: 10sqm per 1lt

STEP 1 - Select Color:

Try different shades of each color range

Description

Zinsser Perma-White mould resistant interior paint contains a biocode that protects the dried coating against fungal degradation. The paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance.

Zinsser Perma-White bonds to existing solvent-based or glossy paints. Perma-White also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.

Perma-White Interior Matt Paint – Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. (This finish was previously known as Eggshell.)
Perma-White Interior Satin Paint – A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.

Preparation

Surfaces must be clean, sound and free of dirt, dust, grease, wax, wallcovering adhesive, soap film, loose paint or other surface contamination.
Remove all existing mould and mildew before painting, such as with Zinsser Mould Killer & Remover.
If you are concerned about mould and mildew behind walls, underneath flooring, in ventilation systems or other unseen areas, contact a professional who specializes in mould and mildew remediation.
For commercial buildings and schools follow appropriate guidelines for mould removal.
Clean surfaces with a solution of one-cup household bleach per gallon of water or a quality biocidal wash.

Application

Shake or stir well before using.
Apply with synthetic bristle brush, roller, pad applicator or sprayer.
For airless spraying, use a .017 tip and high medium (2000-2600 PSI) pressure.
Apply when air and surface temperatures are between 10?and 32?C and humidity is less than 80%.
Zinsser Perma-White is designed to be used as is. If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume.
2 coats are required for proper performance and mould and mildew-resistance.