Description
Zinsser Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates.
Zinsser Peel Stop tightly bonds to old paint and problem areas forming a sound surface for new paint. Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces.
Preparation
- Surfaces should be clean, dry, sound and free of dust, dirt, grime, grease, oil, wax, mould, wallpaper adhesive, or any contamination that may interfere with adhesion.
- If unsure, always wash surface with an appropriate cleaning solution or solvent. Surfaces must be thoroughly scraped and sanded to remove all poorly adhered paint.
- Lightly sand exposed wood to remove loose fragments.
- Dull glossy painted areas with sandpaper.
Application
- Spot prime areas where paint has been scraped or sanded off.
- In most cases only one coat is necessary. Excessively porous surfaces may require a second coat.
- Shake or stir well before using.
- Do not thin.
- Apply with brush and/or roller or airless sprayer.
- Back brush or roll to work Zinsser Peel Stop into cracks and edges of old paint.
- Proper application of Peel Stop will dry to a slight sheen.
- Apply a second coat if dull spots appear.
- For best brushing performance use quality synthetic bristle brushes. Natural bristle brushes are not recommended for use with the product.
Application Conditions
- Apply when air and surface temperatures are between 10? and 32?C and humidity is less than 80%.
- Lower temperatures and higher humidity can prolong drying time.
- If conditions do not permit prompt drying, allow Peel Stop to dry overnight before priming or painting.
- Do not apply Zinsser Peel Stop if rain is expected and primer or topcoat cannot be applied before rain occurs.
Living-room 
Kids-room 
Bedroom