Description
Treatex Bangkirai Oil ( 31280h ) is an exterior wood finish which provides long term protection from UV rays and weather damage. It is manufactured on a base of natural sustainable raw materials including sunflower oil, soybean oil and rapeseed oil.
Preparation
Whilst Treatex Bangkirai Oil can be applied over most previous finishes it works much better on unfinished timber. When overcoating a previously finished surface, a trial application is essential. If a previous finish is to be overcoated then it should be lightly sanded. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust, etc. We advise that when using Treatex Bangkirai Oil, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be between 8º and 25ºc during application and drying. We strongly recommend a trial application prior to starting the project.
Application
Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Bangkirai Oil. Bangkirai Oil is not a surface building product. Pay particular attention to end grain, on end grain apply wet on wet until product is no longer absorbed by the timber. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Bangkirai Oil.. After the second coat leave for approximately 12 hours to dry.
Usage
- Suitable for: internal and external use
- Recommended timbers: Bangkirai, Yellow & Red Balau, Karri, Massaranduba, Iroko & Ipe
- Applications: decking and garden furniture
- Coverage Rate: Treatex estimate that 2.5L will cover approximately 50m² in one coat depending on the timber and method of application.
Living-room 
Kids-room 
Bedroom