Blackfriar Quick Drying Metal Paint

£14.45£45.03 inc VAT

  • Tough durable finish
  • Heat resistant to 150°C / 300°F
  • Resistant to minor fuel splashes, oil and grease

STEP 1 - Select Color:

Try different shades of each color range

SKU: G001296 Categories: , ,

Description

Blackfriar Quick Drying Metal Paint is specially formulated to provide a tough long lasting gloss finish heat resistant to 150c – 300f. An easily applied quick drying solvent based paint ideal for use around the home or factory.

Preparation

  • Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination.
  • Previously painted surfaces in sound condition should be abraded and degreased prior to direct application of Blackfriar Quick Drying Metal Paint.
  • Remove any rust and abrade back to a clean bright surface before priming with Blackfriar Anti-Rust Primer.
  • New or other bare surfaces should be primed with the appropriate Blackfriar Primer.
  • No undercoat is necessary.
  • Galvanised metal should be degreased and primed with Blackfriar Multi Surface Primer.

Application

  • Stir thoroughly prior to use with a broad stirrer.
  • The product may be applied by brush, roller or spray.
  • Two coats are recommended to give best protection.
  • Thinning – Not recommended.
  • Coverage – Up to 14 square metres per litre per coat.
  • Drying Time – Touch dry in 2 – 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Limitations

  • Do not use under cold (less than 5°C), damp or humid conditions. For full fuel/oil resistance allow to dry for at least 3 days before use.
  • Blackfriar Quick Drying Metal Paint in Silver is not resistant to petrol, fuel oil or brake fluid.
  • Not suitable for direct application to galvanised metal, use Blackfriar Multi-Surface Primer first.

Clean Up

  • Remove as much product as possible from application equipment before washing with white spirit.
  • Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

  • Store in a dry, safe place.
  • Do not store in environments where extreme temperatures may occur.
  • Keep within 5-30°C.
  • Do not store in direct sunlight.

Additional information

Size

, ,

Colour

, , , , ,

Select options This product has multiple variants. The options may be chosen on the product page