Leyland Trade One Coat Gloss Brilliant White

£18.95 – £39.98 inc VAT

Provides a tough and durable gloss finish
Excellent opacity
Self-undercoating
Easy application
Requires only one coat under most conditions
Suitable for wood and metalwork
Interior, Exterior use
Coverage : 1- sqm per 1lt
Drying : 16 – 24 Hrs
Application : Brush

STEP 1 - Select Color:

Try different shades of each color range

Description

Leyland Trade One Coat Gloss is an easy-to-use, self-undercoating, high opacity, gloss paint that requires only one coat under most conditions. One Coat Gloss dries to a tough, hardwearing gloss finish on both interior and exterior wood and metalwork.

Leyland estimate that 1 litre of Leyland Trade One Coat Gloss will cover approximately 10 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of a colour in the same room, intermix before use.

Preparation

Ensure surface to be painted is sound, clean, dry and free from grease.
Remove all loose and defective paint.
Prime all new and bare surfaces with the appropriate Leyland primer.
Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

Do not stir.
The brush should be fully loaded for best results.
Occasionally, a small amount of liquid may appear in the tin, if this is not used in the first brushful, remove excess.
Apply paint evenly by brush and avoid overspreading.
Allow to dry overnight before applying a second coat if required.
Do not apply over polystyrene surfaces.

Cleaning

Remove as much product as possible from application equipment before cleaning.
Clean equipment immediately after use with White Spirit or Turpentine Substitute.
Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses.
Replace lid firmly.

Warning

Keep out of reach of children.
Avoid contact with skin and eyes.
Do not ingest.
If medical advice is needed have container or label to hand.
Please refer to Product Label & Safety Data Sheet (SDS) for hazard warnings and information on safe handling/use/transport/storage/disposal/emergency.