Bedec Acrylic Floor Paint

Description

Bedec Acrylic Floor Paint is a hard wearing water based floor paint ideal for new or old interior concrete, stone, and wooden floors. The acrylic floor paint is made up of durable cross linking acrylic resins contributing to its superb abrasion resistance and excellent adhesion properties. The micro aggregate leaves a fine slip resistant finish with good colour retention. Its quick drying and low odour properties make it ideal for domestic or industrial floors.

Preparation

Make sure any surface to be painted is clean, dry and free any possible contaminants such as dirt or grease. Remove any loose paint, as well as any mould and fungal growths. Smooth
glossy surfaces should be lightly abraded to provide a key. See the attached data sheet for specific advice on how to prepare various surfaces.

Application

Apply by brush or roller. Make sure to stir well and always check colour before use. We recommend using a test area first whenever possible. Do not apply at air or surface temperatures below 10°C. Apply two full coats, allowing each coat to dry thoroughly. If the surface area receives high traffic then a third coat may be needed. New concrete should also be allowed to dry thoroughly prior to application.

Coverage

The manufacturer estimates the coverage rate, when applied by a brush or roller, to be approximately 10-13 square metres per litre per coat. The coverage of Bedec Acrylic Floor Paint will depend upon the texture and porosity of the substrate.

Drying Time

Drying time is subject to conditions. The manufacturer estimates that the painted surface will be dry after 2-4 hours, and recoatable after 4 hours. Let the final coat dry for at
least 16-24 hours before the floor is returned to use. Ensure good ventilation during application and drying.

Safety Information

• Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
• If you require medical advice, have the tin and/or label at hand.

• Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.
• Do not get in eyes, on skin or on clothing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do, and then continue rinsing.
• IF ON SKIN: Wash with plenty of water. Do not use solvent or thinners or white spirit.
• IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell at all.