Bedec MSP Multi Surface Paint Bs4800 | Ral | Heritage | NCS

Description

Bedec MSP Multi Surface Paint incredibly versatile paint a unique water based formulation means it can be applied to many different surface without the need for specialist primer or undercoat, application of 2 coats generally will have your item transformed.

Bedec MSP Multi Surface Paint will go over most other paint systems including varnish and weathered tar, and it can be applied to almost any surface, including:

• Plastic
• Wood
• Plastic coated steel
• Brick
• Concrete
• PVCU
• Galvanised steel
• And much more…

We are able to offer a full colour mix system as well as the wide colour choice that is manufactured by Bedec and stocked at Paint Monster. The colour choice is so vast if you ring we can assist in having the product mixed and delivered to you in a very timely manner.

Please Note:

Mixed paints are Non Returnable and Non Refundable. They are made to order, all colours are made using approved manufacturers materials and equipment.

Due to varying screen resolutions, colour swatches shades can vary when mixed in to paint. We would recommend the purchase of a Tester Pot if you are unsure, this would give a more accurate reference of the colour, also looking at the shade in the home environment would give additional assurance as colours are influenced by there surroundings ( Metamarism ).

It is the customers responsibility to ensure you order the correct colour.

Preparation

Make sure any surface to be painted is clean, dry and free any possible contaminants such as dirt or grease. Remove any loose paint, as well as any mould and fungal growths. Lightly abrade any smooth glossy surfaces to provide a key. See the attached data sheet for specific advice on how to prepare various surfaces.

Application

Bedec Multi Surface Paint can be applied by brush, roller, or spray. Stir well and check colour before use. Do not apply at temperatures below 8°C or if rain is likely before the paint has fully dried (see drying times below). On sealed surfaces apply 2-3 coats, and allow each coat to dry thoroughly. Be careful not to over spread.

Spreading Rate

Although the texture and porosity of the surface is a variable factor, Bedec estimates the following spreading rates:

• 750ml – approx. 10 square metres
• 2.5L – approx. 33 square metres
• 5L – approx. 65 square metres

Drying Time

Drying time will depend upon conditions – the manufacturer states the drying time will be 2-4 hours, recoatable after 4 hours. Fully hardened after 1 month.

Safety Information

• Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
• If you need medical advice, have the tin and/or label at hand.
• Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.
• Do not get in eyes, on skin or on clothing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and then continue rinsing.
• IF ON SKIN: Wash with plenty of water. Do not use solvent or thinners or white spirit.
• IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell at all.