Bedec Stain Block Interior / Exterior Grey

£21.45£76.95 inc VAT

  • Quick drying water based
  • Low odour
  • Seals stains Nicotine, Marker pen, Smoke damage & more
  • Interior / Exterior use

STEP 1 - Select Color:

Try different shades of each color range

Description

Bedec Stain Block is a unique water based formulation utilising traditional stain block technology to hold back most normal stains and preventing bleed through the paint systems. Suitable for interior or exterior use, with impressive low odour and quick drying properties. Use Bedec Stain Block to tackle a wide variety of pesky stains, including nicotine, marker pen, tea, coffee, smoke and many more…

Preparation

Make sure any surface to be painted is clean, dry and free any possible contaminants such as dirt or grease. Remove any loose paint, as well as any mould and fungal growths. Lightly abrade any smooth glossy surfaces to provide a key. See the attached data sheet for specific advice on how to prepare various surfaces.

Application

Apply by brush, roller, conventional H.V.L.P or airless spray. Make sure to stir well and always check colour before use. We recommend using a test area first whenever possible. Do not apply at air or surface temperatures below 8°C or when it is likely to rain before the paint has fully dried. Check for staining after the first coat. A second coat may be needed to achieve complete blocking.

Coverage

The manufacturer estimates the coverage rate, when applied by a brush or roller, to be approximately 12-14 square metres per litre per coat. The coverage will depend upon the texture and porosity of the substrate. Spraying will considerably reduce the coverage rate depending on the type of spray equipment used. Check the technical data sheet attached or the Bedec product page for further details.

Drying Time

Drying time is subject to conditions. The manufacturer estimates that the painted surface will be dry after 2-4 hours, and recoatable after 4 hours. Fully hardened after one month. Ensure good ventilation during application and drying.

Safety Information

• Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
• If you require medical advice, have the tin and/or label at hand.

• Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.
• Do not get in eyes, on skin or on clothing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do, and then continue rinsing.
• IF ON SKIN: Wash with plenty of water. Do not use solvent or thinners or white spirit.
• IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell at all.

Additional information

Size

, ,

X

Select options This product has multiple variants. The options may be chosen on the product page