Blackfriar Acrylic Floor Paint

Description

Blackfriar Acrylic Floor Paint. Protects and transforms floors with an attractive, hard wearing tough and durable finish. Ideal for most surfaces including wood, concrete, asphalt and tarmac in light traffic areas. Available in the full range.

Preparation

• Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems.
• Scrape off any old or flaking paint until you have a firm surface.
• Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed.
• New concrete must be left for at least 6 months before applying Blackfriar Professional Acrylic Floor Paint.

Application

• Stir thoroughly before use.
• Apply with a brush or roller working the paint in any surface imperfections.
• On bare or new surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Acrylic Floor Paint.
• On previously painted surfaces apply 1-2 coats as required.
• Blackfriar Professional Acrylic Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic concrete.
• Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions.
• Do not apply in cold (below 10°C), damp or humid conditions.
• If concrete floors have no profile then pre-treat with Blackfriar Professional Acid etch to provide a mechanical key, followed after thorough rinsing by Blackfriar Professional Water Based Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Acrylic Floor Paint.
• Coverage Rate 10-12 square metres per litre per coat. Two coats recommended.
  Drying Time: Approximately 4-6hrs at 20°C. Allow to dry for a minimum of 6hrs at roughly 20°C between coats. Full cure is achieved in 3-5 days at 20°C.

Clean Up

• Remove as much product from application equipment as possible before washing with water.
• Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.