Blackfriar Acrylic Primer Undercoat – White

Description

Blackfriar Acrylic Primer Undercoat. A water based quick drying primer for use inside and outside the home. It dries quickly, so you can apply a second coat of Acrylic Primer Undercoat, enabling you to finish a whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement.

Preparation

• Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination.
• Treat knots and resinous areas with Blackfriar Patent Knotting and allow to dry before applying Blackfriar Acrylic Primer Undercoat.
• Exposed ferrous metal (e.g. nails) should be spot primed with the appropriate Blackfriar Metal Primer.

Application

• Stir thoroughly prior to use with a broad stirrer.
• The product may be applied by brush, roller or spray.
• Two coats are recommended to give best protection.
• On open end grain timber brush in well and apply two coats.
• For porous surfaces or if applying by spray the product may be thinned up to 10% with water.
• Thinning – Maximum 10% water.
• Coverage – Up to 14m2 per litre per coat.
• Drying Time – Touch dry in 1 – 2 hours.
• Recoat after 4 hours and within 3 days.
• Drying times are based on an ambient temperature of 20°C and 50% relative humidity.

Limitations

• Do not use under cold (less than 10oC), damp or humid conditions.
• Not suitable for use on metal surfaces – use Blackfriar Metal Primer or Blackfriar Multi-Purpose Primer.

Health and Safety

• Keep out of reach of children.
• Read label before use.
• If medical advice is needed, have product container or label at hand.
• Dispose of contents and container in accordance with all local, regional, national and international regulations.
• Contains Reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl2Hisothiazol-3-one [EC no. 220-239-6] (3:1).
• May produce an allergic reaction.
• Safety data sheet available on request.
• EU limit values: 50g/l (2007) 30g/l (2010.)
• This product contains a maximum of 30g/l VOC