Blackfriar Professional Anti-Climb Paint – Black

£14.95£67.23 inc VAT

  • Help prevent intruders
  • Slippery Non – Drying
  • Exterior use only
  • Pigmented petroleum wax
  • Apply to gutters, drain pipes, walls, brickwork, plastic, metal
  • Coverage rate: 2m² per litre
  • Application : Brush
  • Cleaning : White spirit

STEP 1 - Select Color:

Try different shades of each color range

Description

Blackfriar Professional Anti-Climb Paint is a non setting slippery coating made from petroleum wax to prevent intruders. The non setting formula will cover the hands and clothing of intruders, while the slippery formulation will further prevent access, making surfaces almost unclimbable, particularly when applied to drain pipes. Protect your property by coating your fencing, walls, windowsills and more.

Blackfriar Professional Anti-Climb Paint can be used on exterior brickwork, concrete, plastic, metal or wood. Apply via brush , the manufacturer estimates a coverage rate of 2m² per litre.

Preparation

Ensure the surface to be painted is sound, clean and dry. Scrape off any old or flaking paint until you have a firm surface. Porous surfaces should be sealed with Blackfriar Professional Solvent Based Floor Sealer. Bare steel after cleaning should be given one coat of Blackfriar Red Oxide Zinc Phosphate Primer. Plastic downpipes should be roughened by rubbing with medium grade abrasive paper.

Application

Apply liberally with a stiff brush or lambs wool mitt. On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1 coat of Blackfriar Professional Anti-Climb Paint. On previously painted surfaces apply 1 coat as required. Only apply to areas not subject to legitimate daily contact usually limited to areas above 6 feet. Blackfriar Professional Anti-Climb Paint works best on surfaces or in areas below 35°C. The product will attract a surface layer of dust but this will not affect performance.

Safety

  • Keep out of reach of children.
  • Read label before use.
  • Flammable liquid and vapour. Keep away from heat, sparks, open flames, hot surfaces.
  • Use only in well-ventilated areas. May cause drowsiness or dizziness.
  • If on skin, rinse skin with water or shower as soon as possible.
  • If medical advice is needed, have product container or label at hand.

Clean Up

Remove as much product from application equipment as possible before washing with White Spirits. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

Additional information

Size

1lt, 2.5lt, 5lt

You may also like…

X

Select options This product has multiple variants. The options may be chosen on the product page