Blackfriar Boiled Linseed Oil 250ml

£4.25 inc VAT

  • Restores and seals wood
  • For soft and hard woods
  • Light gloss
  • Water resistant
  • Interior and exterior use
  • Coverage 10m
  • Hard Dry 12 hours

STEP 1 - Select Color:

Try different shades of each color range

Description

Blackfriar Boiled Linseed Oil 250ml. Penetrates deep into wood, providing an attractive ruby tint with a light gloss finish. Blackfriar Boiled Linseed Oil can be used inside and outside and is ideal for bare woods except oak.

Preparation

  • Ensure surface to be oiled is smooth, clean, dry and free of contamination.
  • For surfaces previously treated with oils or waxes clean back the surface to bare timber with fine wire wool and white spirit, working along the grain.

Application

  • Ensure the product is thoroughly shaken prior to use.
  • Apply oil liberally by brush or rag.
  • Leave for a few minutes for the oil to absorb into the wood then wipe off any surplus.
  • Allow the oil to dry overnight before using or recoating.
  • When applying to new wood thin the first coat with 10% white spirit.
  • Thinning – Maximum 10% white spirit.
  • Coverage Rate: Up to 10 square metres per litre per coat. Will depend upon the porosity of the wood.
  • Drying Time: 12 hours. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Limitations

  • If used on exterior projects regular maintenance will be required to keep the wood nourished.
  • On previously sealed surfaces some oils may dry to a slight gloss.
  • This can be reduced by gently rubbing the surface with fine wire wool and wax polish, working with the grain.
  • Not suitable for use on oak.

Clean Up

  • Take extra care as application cloths and soiled cleaning rags may self ignite without warning.
  • Lay cloths out flat in single layers to dry, or wash out thoroughly in warm soapy water before disposal.
  • Remove as much product from application equipment as possible before washing with white spirit.
  • Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

  • Store in a dry, safe place.
  • Do not store in environments where extreme temperatures may occur.
  • Keep within 5-30°C.
  • Do not store in direct sunlight.

Health and Safety

  • Keep out of reach of children.
  • Read label before use.
  • If medical advice is needed, have product container or label at hand.
  • Dispose of contents and container in accordance with all local, regional, national and international regulations.

Additional information

Brand

Add to cart