Description

Blackfriar Satin Black Paint delivers an attractive, soft black satin finish for both interior and exterior wood and metal. Its durability makes it well-suited for wrought-iron work, gates, doors, and steel fabrications, as well as decorations, picture frames and much more. Blackfriar Satin Black Paint can be applied by brush, roller, and both airless and conventional sprayer. For a Matt finish see Blackfriar Matt Black Paint.

Preparation

Make sure the surface to be painted is clean, dry and free from any contaminants. Remove any flakes or rust and for best results prepare with an appropriate metal primer.

Application

Stir well with a broad stirrer. The manufacturer recommends two coats for the best protection. Use a maximum of 5% white spirit if thinning. Do not paint in cold (under 5°C), damp or humid conditions. Do not apply directly to galvanised metal – degrease the surface and use an appropriate primer first.

Coverage of up to 14m² per litre per coat
Touch dry in 2-4 hours
Recoat after 16 hours and within 3 days

Drying Time

Touch dry in 2 – 4 hours.
Recoat after 16 hours and within 3 days.
Drying times are based on an ambient temperature of 20°C and 50% relative humidity.
Lower temperatures or higher humidity will prolong the drying and overcoating times.

Clean Up

Remove as much product as possible from application equipment before washing with white spirit.
Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

Store in a dry, safe place.
Do not store in environments where extreme temperatures may occur.
Keep within 5-30°C.
Do not store in direct sunlight.

Safety

Keep out of reach of children.
Read label before use.
Flammable liquid and vapour. Keep away from heat, sparks, open flames, hot surfaces.
Use only in well-ventilated areas. May cause drowsiness or dizziness.
If on skin, rinse skin with water or shower as soon as possible.
If medical advice is needed, have product container or label at hand.