Crown Trade Fastflow Quick Dry Gloss | White

£16.29£55.98 inc VAT

  • Breatheasy
  • Advanced water-based technology
  • Contemporary gloss finish
  • Interior and exterior use
  • Application: Roller, Brush or Spray
  • Recoatable Time: 4-6 hours
  • Spreading Rate: Up to 15m2/litre
  • Touch Dry: 1-2 hours

STEP 1 - Select Color:

Try different shades of each color range

Description

Crown Trade Fastflow Quick Dry Gloss is a water-based, long-lasting gloss finish ideal for use on prepared interior and exterior joinery and metalwork. It has all the characteristics of a traditional solvent based satin, with the added benefits of a water based formulation, including quick drying and low odour. Fastflow Quick Dry Gloss also provides excellent opacity and dries to a smooth attractive finish.

Preparation

  • Ensure the surface is sound, clean, dry and free from any possible contaminates such as algae, grease, dirt, and dust.
  • Crown Trade Fastflow Quick Dry Primer Undercoat should be used as a base coat.
  • If a change of colour is required, Crown Trade Fastflow Quick Dry Primer Undercoat should be used.
  • Previously painted surfaces should be thoroughly washed and abraded to provide a key, rinse with clean water and allow to dry.
  • Further advice please refer to the Technical Data Sheet attached.

Application

  • Stir well before use.
  • Apply using a good quality synthetic brush or a good quality micro fibre medium pile roller, to achieve an even thickness.
  • To assist application on porous substrates the surface may be dampened slightly.
  • Maintain a wet edge.
  • On timber lay off in the direction of the grain.
  • Avoid excessive de-nibbing in-between coats.
  • For airless spray dilution may be required. For further information follow the spray manufacturer’s guidelines.
  • Always intermix packs for colour consistency. Please check for colour accuracy prior to application.

Safety

  • Please refer to the Safety, Health and Environmental Information on the container, or the Safety Data Sheet attached.
  • Take special precautions during the surface preparation of pre 1960’s painted surfaces as they may contain harmful lead.
  • When preparing all surfaces avoid the inhalation of dust and/or metal particles. Wear a suitable facemask.
  •  Store in secure dry conditions between 5°C and 40°C and inaccessible to children or animals.
  • Containers should be kept closed during storage.
  • Do not empty into drains, watercourses or access routes to septic tanks.

Additional information

Size

, ,

You may also like…

Select options This product has multiple variants. The options may be chosen on the product page