Description

Everbuild One Strike Filler is a revolutionary filler formulated using lightweight polymer bubbles that fills most holes and cracks, even deep holes, in just one quick application with no need for secondary filling to level off as One Strike will not shrink, sag or crack.

Benefits of using One Strike:

Fills in one go, No need to build up layers of filler fills up to 75mm deep in one application with no sagging the lightweight properties of one strike prevent sagging even on ceilings.

Will not shrink back whilst drying its quick drying and ready to finish in just 30 minutes this product cuts the time that would have been spent waiting for plaster repairs to dry by days.

Also takes paint much better than patching plaster much better and faster.

Easy to use lightweight paste is incredibly easy to apply, No sanding required and finishes to a smooth surface.

Over paintable with most solvent based and emulsion paints also over-stainable but may take stain different to the surrounding area depending on porosity.

Suitable for internal external use once painted and dries brilliant white.

Everbuild One Strike Filler fills gaps and holes in Plaster, Brick, Stone, Wood, Render and more…

Preparation

All surfaces must be clean, dry, free from dust, grease and other contamination.

Storage Conditions: Store between 5 – 25°C.

Application

Apply direct from tub with spatula/spreader.
Smooth over surface and allow to dry.
Sanding is not normally required although the product may be sanded if required.
Maximum Fill 75mm in one coat – Futher layers may be built up
Maximum Width 50mm
Application Temperature 5°C – 30°C
Drying time: the manufacturer estimates approximately 30 minutes at 20°C 50% R.H.