Description
Leyland Super Leytex Matt – High Opacity Emulsion is ideal for new plaster as the permeable, breathable nature of this product allows the moisture to continue drying out of new plaster to prevent the coating de-laminating from the substrate. Generally you would use Leyland Super Leytex Matt on new plaster to base it out and seal the surface for several months prior to then using a vinyl emulsion.
Preparation
- Ensure surface to be painted is sound, clean, dry and free from grease.
- Remove all loose and defective paint.
- Make good surface imperfections and cracks with Filler.
- Prime where required with the appropriate Leyland Primer.
- Rub down glossy surfaces with fine waterproof abrasive paper.
- Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
- Seal absorbent surfaces with a solution of 1 part water to 9 parts Leyland Super Leytex Matt Emulsion.
Application
- Stir Leyland Super Leytex Matt well before use.
- Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added.
- Suitable for application by brush, roller or spray.
- Apply paint evenly by brush or roller and avoid overspreading.
- If required apply a second coat after 2-4 hours.
- Do not apply in temperatures below 10ËšC.
Cleaning
- Remove as much product as possible from application equipment before washing.
- Wash equipment immediately after use in warm soapy water and rinse thoroughly.
- Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses.
- Replace lid firmly.
Warning
- Keep out of reach of children.
- Avoid contact with skin and eyes.
- Do not ingest.
- Do not breathe spray.
- Wear respiratory protection.
- If medical advice is needed have container or label to hand.
- Please refer to Product Label & Safety Data Sheet (SDS) for hazard warnings and information on safe handling/use/transport/storage/disposal/emergency.
Living-room 
Kids-room 
Bedroom