Leyland Trade Acrylic Primer Undercoat White – 5L

£35.95 inc VAT

  • Quick drying
  • Suitable for bare timber surfaces, MDF, Plaster walls, Drywall, Render
  • Superb quality water-based undercoat
  • Low Odour
  • Interior, Exterior use
  • Coverage : 13 sqm per 1lt
  • Drying : 1 – 2 Hrs
  • Application : Brush, Roller, Airless spray

STEP 1 - Select Color:

Try different shades of each color range

Description

Leyland Trade Acrylic Primer Undercoat is a high opacity, general purpose water-based primer. Quick drying and low odour, this acrylic white primer is a popular choice for interior and exterior bare timber surfaces.

Coverage Rate: Leyland estimate that 1 litre will cover approximately 13 square metres, depending on the nature and porosity of the surface.

Drying Times: Under normal conditions, touch dry within 30 minutes, and re-coatable after 1 to 2 hours.

Preparation

  • Ensure surface to be painted is sound, clean, dry and free from grease.
  • Rub down bare timber surfaces with fine waterproof abrasive paper to remove raised grain and sharp edges.
  • Apply Knotting Solution to knots and resinous surfaces.
  • Rub down previously painted surfaces with fine waterproof abrasive paper to provide a key.
  • Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
  • Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir Leyland Trade Acrylic Primer Undercoat well before use.
  • Apply by brush or roller.
  • Apply liberally, brushing firmly into the surface.
  • Treat all accessible timber, in particular the end grain.
  • A second coat serves as an excellent undercoat for Leyland Gloss Finish.
  • Do not apply when the temperature is below 10ËšC or externally when rain is imminent.

Cleaning

  • Remove as much product as possible from application equipment before washing.
  • Wash equipment immediately after use in warm soapy water and rinse thoroughly.
  • Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses.
  • Replace lid firmly.

Warning

  • Keep out of reach of children.
  • Avoid contact with skin and eyes.
  • Do not ingest.
  • Do not breathe spray.
  • Wear respiratory protection.
  • If medical advice is needed have container or label to hand.
  • Please refer to Product Label & Safety Data Sheet (SDS) for hazard warnings and information on safe handling/use/transport/storage/disposal/emergency.

Additional information

Size

, ,

Add to cart