Leyland Trade Truguard Pliolite Based Masonry

Description

Leyland Trade Truguard Pliolite based masonry is specially formulated on durable Pliolite resin, it provides excellent adhesion to the substrate and resistant to rain within 20 minutes of application. This smooth, durable matt finish has the added benefit that it can be applied temperatures as low as -5° enabling year round application.
( Pliolite is a registered trade mark of Eliokem )

Leyland Trade Truguard Pliolite is suitable for application to a variety of substrates, including concrete, cement, rendering, brick, stone, blockwork and pebble dash.

Leyland estimate that 1 litre will cover approximately 8 square metres on smooth surfaces. The coverage rate will be reduced on rough and absorbent surfaces such as pebble dash. When using more than one tin of a colour, it is advised that you intermix the quantity required beforehand.

Preparation

• Ensure surface to be painted is sound, clean, dry and free from grease.
• Treat any mould or lichen with Sterilisation Wash as directed.
• Chalky, underbound surfaces should be scraped, dry brushed and sealed with Leyland Truguard Stabilising Masonry Primer.
• Wear a suitable face mask if creating dust.

Application

• Stir well before use.
• Do not thin.
• Apply two coats, allowing 16-24 hours between coats under normal conditions.
• Do not apply to surfaces which are to be overcoated with conventional undercoat and gloss paint.
• Suitable for application by brush, roller, conventional or airless spray.

Cleaning

• Remove as much product as possible from application equipment before cleaning.
• Clean equipment immediately after use with white spirit.
• Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses.

Warning

• Keep out of reach of children.
• Avoid contact with skin and eyes.
• Do not ingest.
• Do not breathe spray.
• Wear respiratory protection.
• If medical advice is needed have container or label to hand.
• Please refer to Product Label & Safety Data Sheet (SDS) for hazard warnings and information on safe handling/use/transport/storage/disposal/emergency.