Leyland Trade Vinyl Matt Paint | Colours

Description

Leyland Trade Vinyl Matt Paint is a smooth, hard wearing contemporary matt finish incorporating the vinyl which allows the surface to wiped clean a trade quality, durable finish for interior walls and ceilings. Easy application on to wall board, plastered surfaces, wall or lining paper a durable finish ideal for DIY or trade use.

Please Note :

Mixed paints are Non Returnable and Non Refundable. They are made to order, all colours are made using approved manufacturers materials and equipment.

Due to varying screen resolutions, colour swatches shades can vary when mixed in to paint. We would recommend the purchase of
a Tester Pot if you are unsure, this would give a more accurate
reference of the colour, also looking at the shade in the home environment would give additional assurance as colours are influenced by there surroundings ( Metamorism ).

It is the customers responsibility to ensure you order the correct colour.

Preparation

• Ensure surface to be painted is sound, clean, dry and free from grease.
• Remove all loose and defective paint.
• Prime where required with the appropriate Leyland Primer.
• Rub down glossy surfaces with fine waterproof abrasive paper.
• Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
• Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Vinyl Matt.

Application

• Stir Leyland Trade Vinyl Matt well before use.
• Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added.
• Suitable for application by brush, roller or spray.
• Apply paint evenly by brush or roller and avoid overspreading.
• If required, apply a second coat after 2-4 hours.
• Do not apply in temperatures below 10˚C.

Cleaning

• Remove as much product as possible from application equipment before cleaning.
• Clean equipment immediately after use in warm soapy water and rinse thoroughly.  Some local authorities have special facilities for disposal of waste coatings.
• Do not empty product into drains or watercourses.
• Replace lid firmly.

Warning

• Keep out of reach of children.
• Avoid contact with skin and eyes.
• Do not ingest.
• Do not breathe spray.
• Wear respiratory protection.
• If medical advice is needed have container or label to hand.
• Please refer to Product Label & Safety Data Sheet (SDS) for hazard warnings and information on safe handling/use/transport/ storage/disposal/emergency.