Liberon Superior Danish Oil

£6.92£56.12 inc VAT

  • Blend of pure Tung Oil and natural oils
  • Feeds and enhances wood
  • Suitable for kitchens & bathrooms
  • Water, heat and alcohol resistant
  • EN71 approved toy safe
  • Suitable for interior and exterior use
  • Added UV filter for protection against sunlight
  • Application : Brush, Cloth
  • Drying : Minimum 5 hrs
  • Coverage : 10 – 12 sqm per 1lt
  • Cleaning : White spirit

STEP 1 - Select Color:

Try different shades of each color range

SKU: PM-LIB10 Categories: , , , ,

Description

Liberon Superior Danish Oil is a superior blend of pure, high quality Tung oil and natural oils that feed, enhance and protect hard and soft woods. It is a penetrating oil, which brings out the natural grain of the timber and provides a satin to gloss sheen. With added UV filters to help prevent discolouration from the sun, as well as its water, heat and alcohol resistance, Liberon Superior Danish Oil is suitable for both interior and exterior use. Superior Danish oil is a blend of natural oils that feed and nourish wood. When applied, it penetrates deep into the wood, enhancing the natural beauty of the grain and providing a long-lasting, protective finish.

One of the main advantages of using Liberon Superior Danish Oil is its ability to protect wood against everyday wear and tear, as well as environmental factors such as moisture and UV rays. It can be applied to a wide variety of wooden surfaces, including furniture, floors, doors, and even outdoor decks and fences.

Another benefit of using Liberon Superior Danish Oil is its ease of application. It can be applied using a brush, cloth or spraying equipment, and does not require any specialist skills or tools. Additionally, it dries quickly and can be easily maintained and refreshed over time.

Overall, if you are looking for a natural, high-quality wood finish that offers both protection and beauty, Liberon Superior Danish Oil is an excellent choice. Its unique blend of oils and easy application make it a go-to product for both DIY enthusiasts and professionals alike.

Preparation

Interior woodwork:

Ensure the surface is bare. Remove any wax finishes with Wax and Polish Remover and any varnish finishes with Fine Wood Stripper. Clean, dry and ensure the surface is dust free. If required stain the wood with Palette Wood Dye before oiling.

Exterior woodwork:

Ensure the surface is clean, dry and free from decaying timber. Surface greying or mould should also be removed as this may cause blackening of the timber.

Application

Interior woodwork:

  • Apply with a brush or lint-free cotton cloth and allow to penetrate for five to 10 minutes before wiping off excess with a clean lint-free cloth.
  • Allow to dry for a minimum of five hours and apply more coats as required. We recommend a minimum of three coats.
  • For best results gently rub with Ultra Fine Steel Wool (Grade 0000) between coats.
  • In damp areas, such as kitchens and bathrooms, more coats will be required to ensure adequate protection.

Exterior woodwork:

  • Apply as above.
  • Application of four coats will give minimum protection. Exposed areas will require more coats.
  • It is important to ensure sufficient coats of oil are applied initially to give maximum protection.
  • It is not necessary to remove excess on sawn timber, but wipe off any runs.

Important

Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test the product on spare surface of inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance

Interior woodwork:

Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be used. Surfaces need to be re-oiled once a year or more, depending upon usage.

Exterior woodwork:

Clean off any surface grime, moulds, etc., (sand if required) before re-oiling. Exterior timbers need to be maintained on a regular basis, at least twice a year.

Precautions

  • Superior Danish Oil may darken some timbers and blackening may occur on some external timbers.
  • 
Store Superior Danish Oil at a temperature above 5°C.
  • Always replace the lid otherwise the oil can deteriorate.
  • Oily cloths can self-combust. Do not leave impregnated cloths in bundles. Before discarding the cloths lay them flat outside to dry to avoid a fire hazard.
  • Superior Danish Oil is not suitable for use on external oak. Pure Tung Oil is recommended for this purpose.
  • If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Additional information

Size

250ml, 500ml, 1lt, 2.5lt, 5lt

You may also like…

Select options This product has multiple variants. The options may be chosen on the product page