Owatrol Dilunett Paint Removing Gel

£21.36£45.18 inc VAT

  • Does not contain solvent or paraffin non flammable.
  • Strips waxes, varnish, paint and most antifouling paint.
  • Coating becomes soluble with water (rinse with water).
  • Strips up to 8 coats
  • Coverage Rate: 4m² per litre
  • Tools: Flat blade, synthetic brush, power washer
  • Exterior use
  • Clean up: Water
  • Working Time Alkyd/Oil-based: 1 coat: 5-15 mins, 2 coats: 10-30 mins, 3 coats: 15-45 mins
  • Working Time Acrylic: Test on a small area to determine working time
  • Suitable for all surfaces except aluminium (safe on gelcoat)

STEP 1 - Select Color:

Try different shades of each color range

SKU: G001270 Categories: , ,

Description

Owatrol Dilunett is a powerful, water washable solvent free paint stripper that will remove any oil and alkyd based paint, varnish or woodstain. The gel consistency of Dilunett means it will not run, thereby making it perfect for vertical surfaces, elaborate plaster or wood designs that need to be stripped. Up to 8 coats can be stripped in just a single application of Dilunett, which dissolves paint in even the smallest of recesses and the finest of details, softening all the layers for a simple and clean removal.

Owatrol Dilunett is suitable for almost any surface such as wood, metal and plastic. It is biodegradable, non-flammable, and safe to use in poorly ventilated or confined areas. Dilunett also does not requiring constant supervision or immediate removal of the softened coating.

Ideal Uses

  • Can be used on most surfaces; on wood (some woods such as Oak and Chestnut require more attention before using Dilunett), metal (except Aluminum), plastic, stone, cement etc
  • Wood Stain Remover
  • Ideal for surfaces difficult to strip due to size or intricate design
  • Suitable for both horizontal and vertical surfaces.
  • Solvent-free so no toxic fumes.
  • Capable of removing up to 8 coats of finish in just 1 application.
  • Non-flammable, does not dry out and remains active a long time.
  • Does not attack plastics, rubber, synthetic coating or gel coats (GRP).

Preparation

  • Remove any loose and flaking paint.
  • Brush off any physical surface contamination such as moss and general dirt.

Application

  • Apply a thick coat of Dilunett over the whole surface to be stripped.
  • For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood.
  • Allow product to work.
  • Remove Dilunett and dissolved paint with a stiff nylon scrubbing brush or paint scraper while flushing with water, alternatively use a pressure washer (max 60bars / 870psi). The use of hot water makes the job easier
  • Thoroughly rinse the surface with fresh clean water.
  • After stripping and rinsing, all porous surfaces must be immediately treated with Net-trol while still wet to neutralise the surface.

 

For further information and advice please refer to the Technical Data Sheet.

Additional information

Size

,

X

Select options This product has multiple variants. The options may be chosen on the product page