Owatrol Marine Strip

Description

Owatrol Marine Strip is a powerful water-soluble paint and anti-fouling stripper designed for marine uses which can remove up to 8 coats in just one application. It is perfect for use on boat gelcoats as its gel consistency means no drips, even on vertical surfaces. Ideal for the removal varnish, paint, anti-foulings works on metal, GRP, wood, plastic – it is safe to use on virtually any surface.

Several qualities make Owatrol Marine Strip a delightfully straightforward and useful stripper. First of all, after it has done its job it can simply be rinsed away with water using a pressure washer as it is water-soluble. Second, it doesn’t require constant supervision and immediate removal as some products do due to its longer working time (up to 12 hours). Also, as it is VOC free and non-flammable, Marine Strip is perfectly safe to us in poorly ventilated or confined areas. A must-have for all boat owners, Owatrol Marine Strip is a powerful but easy to use paint stripper for almost any surface on your boat.

Ideal Uses

• Reviving the gelcoat on your boat
• Stripping peeling paint or varnish from handrails
• Removing wood stain from boat decks
• Stripping old paint from metal fixtures

Preparation

Remove any loose and flaking paint. Then brush off any physical surface contamination i.e. moss, general dirt etc.

Application

Always try a sample area first. Apply a thick coat of Marine Strip over the whole surface to be stripped using a flat blade, roller or brush. Let the product work for the desired length of time. To remove Marine Strip and any dissolved paint, rinse it very thoroughly with fresh water and a brush or pressure washer (use hot water to make this easier).

If the surface which has been stripped is wood, always neutralise it with Owatrol Net-Trol immediately afterwards. For best results do not let Marine Strip work longer than required to dissolve the paint. ‘Weak’ wood like some veneers or plywoods may be damaged so always test first! Hardwood, especially those rich in tannins (oak, exotic wood, etc.) can turn dark if in prolonged contact with Marine Strip. Where Marine Strip has darkened the wood do not allow it to dry prior to using Owatrol Net-Trol.

• Always carry out a preliminary test to determine the contact time required for stripping.
• Apply between 5°C and 35°C.
• Do not apply in direct sunlight or on a hot surface.
• Do not allow Marine Strip to dry on the surface. If drying occurs dampen with mist application of water.

Caution

• Marine Strip will not remove 2 pack paints, baked on paints or polyurethane paint and varnish.
• Do not use on ‘weak’ woods such as veneers.
• Do not use on aluminium.
• Wear chemical resistant gloves, safety goggles and protective clothing.
• For best results on wood, do not let Marine Strip work longer than required to dissolve the paint.
• Treat stripped wooden surfaces with Net-Trol to restore the wood’s original colour.
• Cover and protect everything you do not wish to strip, including plants and shrubs.
• Consult us or Owatrol for additional information and advice prior to using Marine Strip on Oak and Chestnut.