Description
Rustins Quick Drying Clear Varnish is a tough durable water-based coating ideal for interior wood work such as doors, skirting, balustrade and furniture. It can also be used to seal concrete, brickwork or plaster. The quick drying low odour formulation makes it ideal for around the home, and when dry it leaves a tough protective coating resistant to most household wear and cleaning materials.
Rustins Quick Drying Clear Varnish is not for use over scumbles or oil-based paints. Other types of coatings/stains may be incompatible, including acrylic paints and vinyl emulsion. Always apply on a test area to determine compatibility.
Preparation
- Surfaces must be clean and previous coatings should be removed.
- It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels.
Application
- Stir well before use. Satin and Matt finishes may dry glossy if not thoroughly stirred, check
for settlement on the bottom of the tin and stir to mix-in. - May be applied with a synthetic brush, varnish roller or sprayed (can be diluted with water about 10% if necessary for spraying, or if the temperature is high).
- Apply 2 or 3 coats. Lightly sand after 1st coat to flatten any raised grain.
- Drying Time: Touch dry in approximately 20 minutes, depending on temperature and humidity.
- Re-coat after 2 hours.
- Application Temperature – Ideally 15-25°C/ Do not use below 10°C or in conditions of high humidity.
- Coverage: approximately 12-15 square metres per litre per coat, depending on the absorbency of surface.
Maintenance
- The varnish will take 3 days to fully harden.
- Spills should be wiped-up immediately during this time to prevent damage. The surface can be cleaned as required with a mild detergent solution, do not use aggressive cleaning products.
- Re-coat the varnish as necessary, after cleaning and lightly sanding the surface.
Living-room 
Kids-room 
Bedroom