Teknos Ferrex Aqua Combi White | Semi Matt Finish

Teknos Ferrex Aqua Combi  is a water-borne tintable anticorrosive paint for priming, top coating and one layer painting for nearly all unpainted and previously painted metal surfaces indoors and outdoors. Excellent adhesion to metal and painted surfaces, as well as good weather and wear resistance. Corrosivity categories C4 and C5. Finish: semi-matt.

Objects to be painted: Metal surfaces indoors and outdoors. Steel and iron surfaces, when excellent anticorrosive properties and/or adhesion priming are required: e.g. sheet-iron roofs, facades, balcony constructions, roof ladders, fence constructions, doors, windows, pillars, beams, fixed and detached furniture. Recommended substrates: Various metal surfaces, such as iron, steel, zinc-coated steel, galvanized sheet steel (roof and facade sheets), aluminium and copper. Metal surfaces previously painted or primed with acrylate, alkyd, polyurethane, epoxy and polyester binder based paints or coatings. Adhesion on prefabrication primers is also good. Good weather resistance, so top coating is not necessary. Excellent colour and gloss retention.

Surface Preparation

STEEL AND ALUMINIUM SURFACES: Surfaces to be painted are cleaned from dirt, grease, oil and other impurities. RENSA STEEL washing agent, solvent wiping etc. is used for cleaning. Steel surfaces: minimum requirement is thorough wire-brushing to preparation grade St2; recommendation to preparation grade Sa 2½ (ISO 8501-1). PREVIOUSLY PAINTED METAL SURFACES: Surfaces are cleaned from dirt, grease, oil and other impurities. RENSA ROOF washing agent, solvent wiping etc. is used for cleaning. Loose and poorly adherent paint or coating is removed. Rust is removed from the surfaces (preparation grade St2) using wire-brushing or other suitable method. Hard and glossy painted surfaces are roughened matt in order to ensure adhesion. PLASTIC COATED ROOF AND WALL SURFACES: Can be used for touch-up painting of rusted areas. Rust is removed from the surfaces (preparation grade St2) using wire-brushing or other suitable method. The edge of the cleaned area and solid paint layer is sanded smooth in order to ensure adhesion of the top coat. Sand the old painted surfaces matt from the areas, which will be touch-up painted with FERREX COMBI.