Wallrock Thermal Liner Adhesive

Description

Wallrock Thermal Liner Adhesive is a strong water based paste the wall adhesive. The paste the wall formula will also assist in filling small cracks making the filling and preparation time quicker and easier. Thermal liner adhesive is specially formulated to apply Wallrock thermally efficient wallpapers, suitable also for polystyrene insulation products, PUR sound insulation. Easy roll paste the wall formulation for quick easy application directly to the wall using a roller or a brush. Typical consumption of 2m² to 1.5m² per kg.

Recommended for use with Wallrock Thermal Liner 1000639 and Wallrock Thermal Liner KV600.

Before Use

This product is ready-mixed and ready to use, however some storage conditions may contribute to separation of water, visible on top of the product. This can be easily stirred into the bulk of the product without affecting its performance properties. Despite stringent quality assurance procedures, defects may occur in exceptional cases from time to time. If a fault is found, please return any defective material to the place of purchase. Please see wallpaper roll labels for hanging instructions for each individual lining system.

Surface Preparation

Thermal Liner Adhesive can be used on most internal wall surfaces. The adhesive contains filler and can be used in conjunction with our wallcovering products to cover surface imperfections and textures. All surfaces should be firm, dry and clean, all loose material should be removed before the adhesive is applied. Major surface imperfections should also be filled and levelled in preparation. Drywall and other absorbent surfaces should be sized and completely left to dry for at least 4 hours before application of the adhesive.

Drying Time

Drying time depends upon room temperature, humidity, thickness of the paste layer and surface absorbency but is normally complete after 24 hours. In some circumstances you may have to wait longer before any other wallcoverings are applied to the Thermal Liner. Check for adhesion before commencing any subsequent redecoration. The adhesive may be used to fill any small gaps at the seams, smooth down using sandpaper before decoration.