Zinsser AllCoat Exterior Water Based Paint

Description

Zinsser AllCoat Exterior Water Based Paint is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.

Available in white, black and a selection of bases that can be tinted to any colour. The paint is self priming and can be applied to previously painted surfaces without sanding, even glossy paints or those coated with bitumen, tar varnish or creosote. For most jobs, there is no need to purchase a separate primer.

Zinsser AllCoat Exterior gives excellent resistance against cracking, blistering and flaking. The tough finish is resistant to rain and severe weather and offers excellent colour retention. In addition the paint contains a biocide to protect the dried coating against fungal degradation. After removing any existing mould and mildew, two coats of AllCoat Exterior will ensure that any exterior looks bright and beautiful for years.

The first coat primes and seals the surface, providing a base for the topcoat. The topcoat completes the sealing process while providing additional moisture resistance and protection. This paint is ideally suited to exterior buildings with timber and metal cladding.

Application

• Shake or stir well before using.
• Apply with synthetic bristle brush, roller, or sprayer.
• For airless spraying, use a .017? tip and high-medium (2000-2500 PSI) pressure.
• Ensure air and surface temperature are between 10? & 32?C and humidity is less than 85% during application and cure of the product.
• Avoid painting in direct sunlight and maintain a ?wet edge? to avoid lapping.
• Ensure conditions during application and cure are favourable. Do not apply if there is a likelihood of rain, frost, fog, or condensation affecting the freshly applied paint before it has fully cured.
• At normal temperatures i.e. 21?C, Zinsser AllCoat?dries to recoat in 1 hour. Full adhesion and hardness develop in 7 days.