Description
Zinsser SealCoat is the perfect sanding sealer because it penetrates the surface, dries quickly and gives a rich tone to wood surfaces. Non-yellowing.
Zinsser SealCoat seals all types of wood surfaces including oak, maple, chestnut, mahogany, walnut, birch, poplar, cherry and more. It is recommended for interior woodwork such as paneling, moulding, trim, windows, doors, cabinets, furniture and toys. SealCoat is also great for wood floors.
Key Features & Benefits
- Compatible with clear wood finishes
- Great for sealing interior wood, including floors
- Dries lightning fast – can be sanded and recoated in minutes
- Does not darken or yellow with age
- Gives extra beauty and warmth to water-based polyurethanes
- Can be used as a pre-stain
Preparation
- Surfaces must be clean, dry, and sound.
- Remove any wax from the surface with methylated spirits.
- Sand bare wood as smoothly as possible and remove all sanding dust.
- Previously applied wood stains must be completely dry.
- Previously applied finishes must be clean and tightly adhered.
Application
- Thinning is not normally necessary.
- Apply evenly and consistently and allow to dry 45 minutes before sanding with 120 or finer grit sandpaper.
- Remove all dust and apply finish coat.
- Note: A second coat of sealer will improve the film build and give added depth to the final finish on porous or open grain woods such as oak, mahogany, etc. Allow second coat to dry 1 hour before sanding lightly and applying finish coat.
- Do not apply when RH is greater than 85% or when temperature is within 2?C of the dew point.
- Zinsser SealCoat is not recommended for use in areas where surface heat exceeds 71?C.
Living-room 
Kids-room 
Bedroom